System 3000 universal LED rotary dimming insert Komfort
Specification
Item no.
Room
Quantity
EAN
PU
PS
2455 00
4010337031413
1/5
02
Price system (PS) not equal to 1, 14 = reduced discount.
Note: For legal reasons, some products are not available in certain countries.
EAN 4010337031413
Item no. 2455 00PU 1/5
PS 02
Price system (PS) not equal to 1, 14 = reduced discount.
Note: For legal reasons, some products are not available in certain countries.
Necessary accessories
Abdeckungen
Optional accessories
Wippschalter / Wipptaster
Zubehör
Features
- Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lights, dimmable inductive transformers for halogen or LED lights, HV LED or compact fluorescent lamps.
- Connecting auxiliary units is possible.
- Automatic or manual setting of dimming principle according to load (leading or trailing edge).
- Display of the selected operating mode using LED.
- Switch-on function that preserves the life of the lamp.
- Switch-on brightness can be saved permanently.
- Switch on with the last brightness set, or a saved switch-on brightness.
- Hotel-card function can be activated: Light switches “On” following power interruption (from index 01).
- Minimum brightness can be set.
- Electronic short-circuit protection.
- Electronic excess-temperature protection.
- Operation with or without a neutral conductor connection.
Technical data
| Rated voltage | AC 230 V, 50/60 Hz |
| Standby | max. 0.35 W |
| Connected load at 25 °C | |
| HV LED lamps (leading edge) | typically 3 to 100 W |
| HV LED lamps (trailing edge) | typically 3 to 400 W |
| Compact fluorescent lamp | typically 3 to 100 W |
| Light bulbs | 20 to 420 W |
| HV halogen lamps | 20 to 420 W |
| Tronic transformers | 20 to 420 W |
| Electronic transformer with LV LED (leading edge) | typically 20 to 100 W |
| Electronic transformer with LV LED (trailing edge) | typically 20 to 200 W |
| Wound electronic transformer | 20 to 420 VA |
| Wound transformer with NV-LED | typically 20 to 100 VA |
| Auxiliary units | |
| Non-illuminated mechanical push buttons | unlimited |
| 2-wire auxiliary insert | unlimited |
| 3-wire auxiliary insert | max. 10 |
| Cable length | |
| Auxiliary unit | Max. 100 m |
| Load | Max. 100 m |
| Installation | in device box pursuant to DIN 49073 |
| Installation depth | 24 mm |
| Connection cross section | |
| Single-wire | Max. 4 mm² |
| Fine-wire without core jacket | Max. 4 mm² |
| fine-wire with core jacket | Max. 4 mm² |
| Ambient temperature | -5 °C to +45 °C |
Notes
- In principle, it is possible to operate the dimmer without connecting the neutral conductor, but some LED and CFLi light sources make the neutral conductor connection necessary to avoid flickering.
- Operation without a neutral conductor increases the minimum load for light bulbs, HV halogen lamps, Tronic transformers and wound transformers to 50 W.
- Electronic transformers and ballast devices for LED lamps can be operated with the dimming procedure specified by the manufacturer.
- If the ambient temperature is higher than 25 °C, the connected load must be reduced.
Universal LED rotary dimming insert Komfort
Operating instructions
Operating instructions.
Operating instructions
Operating instructions.