Switching actuator, 8-gang 16 A with manual actuation and current measurement for C-load, for KNX
Specification
Item no.
Room
Quantity
EAN
PU
PS
DRA
1046 00
4010337042273
1
66
Price system (PS) not equal to 1, 14 = reduced discount.
Note: For legal reasons, some products are not available in certain countries.
DRA
EAN 4010337042273
Item no. 1046 00PU 1
PS 66
Price system (PS) not equal to 1, 14 = reduced discount.
Note: For legal reasons, some products are not available in certain countries.
Features
- Manual actuation of the relay separately from the bus or the switching position indication.
- NO contact or NC contact operation.
- Central switching function.
- Group feedback for reduction of bus load.
- Active or passive (object can be read out) cyclical feedback function.
- Feedback can be delayed until after the recovery of bus voltage.
- Logical linking function for each output.
- Blocking function can be parametrised for each channel. As an alternative, forced setting function for each output.
- Time functions (switch-on and switch-off delay, staircase light function – also with pre-warning function).
- Integration in light scenes is possible, eight internal scenes at the most can be parameterised per channel.
- Memory function for light scenes.
- Elapsed-hours meter as forward/backward counter with limit function (limit can be changed via bus) can be activated for each output.
- Input monitoring for cyclical updating with safety setting.
- Reactions in case of bus voltage failure and restoration can be set for each channel following an ETS programming process.
- The switching contacts of the switching actuator, 8-gang, C-load are especially designed for loads with a capacitive character, and therefore conditional, brief, high switch-on currents (see Technical Data).
- The switching actuator has an integrated current detection.
- A current measurement can be carried out for each channel.
- Current detection: Measurement of load current for each channel.
- Threshold values for load monitoring (e.g. load failure notification).
- Independent switching of the eight outputs.
Technical data
| KNX medium | TP256 |
| Connections | |
| KNX | Connection and junction terminal |
| Load | Screw terminals |
| Relay | |
| Quantity | 8 |
| Contact | 1 x zero-voltage NO contact each, flip-flop |
| Breaking capacity 230 V AC | 16 A / AC1 or 16 A / AC3 |
| Switching capacity 400 V AC | 10 A / AC1 or 10 A / AC3 |
| Maximum switch-on current | 600 A, 150 µs, 300 A, 600 µs |
| Connected load | |
| Ohmic load | 3680 W |
| Capacitive load 230 V AC | 16 A, max. 200 µF |
| Light bulbs | 3680 W |
| HV halogen lamps | 3680 W |
| Wound electronic transformer | 2000 VA |
| Tronic transformer | 2500 W |
| Fluorescent lamps, uncompensated | 3680 VA |
| Fluorescent lamps,lead-lag circuit | 3680 VA |
| Fluorescent lamps, parallel-compensated | 2500 VA |
| Mercury-vapour lamps, uncompensated | 3680 W |
| Mercury-vapour lamps, parallel-compensated | 3680 W |
| Connection cross section | Max. 4 mm² |
| Current detection | 0.25 to 16 A sine |
Notes
- Installation on DIN top-hat rail.
- VDE approval in accordance with EN 60669-1, EN 60669-2-1.
Scope of delivery
- Connection and junction terminal for KNX included with delivery.
Dimensions
| Modular widths (MW) | 8 |
Switching actuator 4-/8-gang 16 A with manual activation and current measurement for C loads
Technical documentation
Technical documentation.
Technical documentation
Technical documentation.
Switching actuator, 2-gang/4-gang/8-gang, 16 A and 4-gang/8-gang, 16 A C load
Operating instructions
Operating manual.
Operating instructions
Operating manual.
Switching actuator, 8-gang 16 A with manual activation and current measurement for C loads
Product database
Product database from ETS2
Product database
Product database from ETS2
Switching actuator, 8-gang 16 A with manual activation and current measurement for C loads
Product database
Product database from ETS3.0d
Product database
Product database from ETS3.0d
Switching actuator 4-/8-gang 16 A with manual activation and current measurement for C loads
Technical documentation
Technical documentation.
Technical documentation
Technical documentation.
Switching actuator, 2-gang/4-gang/8-gang, 16 A and 4-gang/8-gang, 16 A C load
Operating instructions
Operating manual.
Operating instructions
Operating manual.
Switching actuator, 8-gang 16 A with manual activation and current measurement for C loads
Product database
Product database from ETS2
Product database
Product database from ETS2