Set of phase busbars, 1-pole for switching actuator, 16-gang/ blind actuator, 8-gang for Gira One and KNX 6 pieces phase rails, 4 units end caps

• Actuator for switching devices or for controlling blinds, shutters, awnings, skylight operation.
• In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into one blind output.
• Mixed operation at one actuator (e.g. A1 and A2 blind, A3 & A4 blind, A5 switching, A6 switching, etc.) is possible.
• Manual actuation of the outputs.
• Programming and start-up with the Gira Project Assistant (GPA), from version 5.0.
• Encrypted data transfer between the Gira One devices.

Shading and ventilation function

• Control of slat blinds, shutters, awnings, skylights or roof domes.
• Runtimes optionally adjustable.
• Sun protection function with curtain or slat positions at the beginning or end of the function that can be set for each output.
• Setting of the delay time at the beginning or end of the sunshine.
• Fabric stretching for awnings.
• In the event of an active wind alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the wind alarm, the blinds raise and are automatically locked. The status of the binary input is monitored on a cyclical basis.
• In the event of an active rain alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the rain alarm, the skylights or roof domes close immediately and are automatically locked. The status of the binary input is monitored on a cyclical basis.
• In the event of an active frost alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the frost alarm, active travel by shutters is stopped and locked to protect the shutter motor. The status of the binary input is monitored on a cyclical basis.
• Door contact query and visualisation in the Smart Home App: An open door results in the raising and locking of the blind or shutter.

Switching functions

• NO contact or NC contact operation.
• Setting of a switch-on or switch-off delay.
• Staircase function; a pre-warning time can also be set.
• Parameterisation as a switching function for lights or socket outlets, a garage door function or a door opener function, for example.
• Garage door function: The time for closing the relay can be parameterised.
• Door opener function: The time for closing the relay can be parameterised.

• Installation on DIN top-hat rail.
• Can be updated via the Gira Project Assistant (GPA)

• KNX connection and junction terminal included with delivery.