Motion detector Cube 120
Specification
Item no.
GBP/unit
excl. VAT:
excl. VAT:
Room
Quantity
EAN
PU
PS
pure white glossy
2442 02
120.15
4010337056430
1
08
anthracite
2442 10
125.61
4010337056416
1
08
Recommended retail price, prices valid for United Kingdom as of the stated date 01/26
Price system (PS) not equal to 1, 14 = reduced discount.
pure white glossy
EAN 4010337056430
Item no. 2442 02PU 1
GBP 120.15PS 08
anthracite
EAN 4010337056416
Item no. 2442 10PU 1
GBP 125.61PS 08
Recommended retail price, prices valid for United Kingdom as of the stated date 01/26
Price system (PS) not equal to 1, 14 = reduced discount.
Optional accessories
Features
- Automatically switches lighting on/off, depending on thermal motion and ambient brightness.
- Automatic temperature-compensated sensor sensitivity.
- Continuous light (max. 2 h) can be activated using an optional switch/button.
- Test mode for evaluating the detection range.
- Individual adaptation of the detection range using the enclosed covering panel that can be cut to size.
- Adjustable switch-off delay: 5 s to 15 min or short-term operation of 1 s.
- Save current twilight value using teach-in function.
- Glare protection, brightness-independent sensor evaluation for 60 s in the event of glare caused by extraneous light.
- Short-time operation, output is switched on for approx. 1 s.
- Remote control optional.
Technical data
| Rated voltage | AC 230 V~, 50/60 Hz |
| Connected load | |
| HV LED lamps | typically 200 W |
| Light bulbs | 2000 W |
| Fluorescent lamps, uncompensated | 1000 VA (cos φ = 0.5) |
| Fluorescent lamps, parallel-compensated | 500 W (45.6 µF) |
| Fluorescent lamps, series-compensated | 900 W |
| Capacitive load | 176 µF |
| Brightness value | |
| Brightness value | 2 to 1000 lx |
| Setting controller | |
| Delay time | 5 seconds to 15 minutes |
| Connection cross section | |
| Single-wire | Max. 2.5 mm² |
| Fine-wire without core jacket | Max. 2.5 mm² |
| fine-wire with core jacket | Max. 1.5 mm² |
| Protection level | IP54 |
| Ambient temperature | -25 °C to +55 °C |
| Angle of detection | 120° |
| Mounting height 2.50 m | |
| Detection range facing forwards, max. | approx. 16 m |
| Range at each side, max. | approx. 11 m |
Notes
- Suitable for ceiling and wall mounting indoors and outdoors.
- Optional: Can be controlled remotely using IR remote control PIR 3.
- Observe high peak switch-on currents with "energy saving lamps". Check suitability of the lamps before use!
Scope of delivery
- Covering panel for adapting the detection range is included with delivery.
