Gira Keyless In Keypad System 70

• Installation in a device box.
• Stand-alone device or in combination with the Gira door communication system.
• During stand-alone operation, the integrated zero-voltage relay contacts are used for switching actions, e.g. for door openers withtheir ownPower supply(e.g. standard bell transformer).
• Commissioning with direct configuration without a PC or programming software.

Inputs and outputs

• Switching contact: Two relays with zero-voltage 2-way switch contacts, load capacity AC/DC 24 V / 1.6 A.
• Two connections for power supply.

• Keypad as an access control system with a capacitive and therefore wear-free button field.
• No recognisable wear on frequently used number combinations.
• Stand-alone device or in combination with the Gira door communication system as a door call system for buildings with several residential units.
• Special button "C": Deleting an incorrect entry.
• Special button "Key": Direct door opening when the correct code has been entered.
• Special button "Bell": Specific selection of home stations in large facilities.
• Special button "F": Switching functions with switching actuators from the Gira door communication system.
• Homogeneous blue LED lighting of the numbers and special characters at night.
• Master PIN number provided on included sealed safety card if Administrator PIN number is lost.
• The keypad can manage up to 255 codes.
• Up to 32-digit codes are possible.
• Audible feedback when buttons are touched.
• 3-colour LED status display when programming and during operation.
• Warning tone in case of unauthorised removal of the keypad top unit for tamper detection. Tampering circuit with switching actuator in the Gira door communication system.
• The two integrated 2-way momentary contact relays can be assigned two different codes, e.g. code 1: open door, code 2: switching outside light.

Inputs and outputs

• Connector strip connection cable for Gira door communication system.

• Keyless In devices can be connected to the Gira HomeServer using the DCS-IP gateway. This enables intelligent links. In this way, e.g. temporary or one-time access authorisation can be easily granted. All data including access authorisations can be managed centrally and flexibly using the Gira HomeServer.

• Integration into Profile 55 possible.
• The Gira AppShop is the marketplace for interesting solutions and applications in intelligent building technology. There are now more than 200 apps available, including application descriptions, plug-ins, function templates, logic nodes and sample projects. Discover applications for the Gira Keyless In keypad now.www.appshop.gira.de/en.