Switching actuator, 6-gang 16 A / blind actuator, 3-gang 16 A Standard for Gira One and KNX

Function in the Gira One system

• Actuator for switching devices or for controlling blinds, shutters, awnings, skylight operation.
• In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into one blind output.
• Mixed operation at one actuator (e.g. A1 and A2 blind, A3 & A4 blind, A5 switching, A6 switching, etc.) is possible.
• Manual actuation of the outputs.
• Programming and start-up with the Gira Project Assistant (GPA), from version 5.0.
• Encrypted data transfer between the Gira One devices.

Shading and ventilation function

• Control of slat blinds, shutters, awnings, skylights or roof domes.
• Runtimes optionally adjustable.
• Sun protection function with curtain or slat positions at the beginning or end of the function that can be set for each output.
• Setting of the delay time at the beginning or end of the sunshine.
• Fabric stretching for awnings.
• In the event of an active wind alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the wind alarm, the blinds raise and are automatically locked. The status of the binary input is monitored on a cyclical basis.
• In the event of an active rain alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the rain alarm, the skylights or roof domes close immediately and are automatically locked. The status of the binary input is monitored on a cyclical basis.
• In the event of an active frost alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the frost alarm, active travel by shutters is stopped and locked to protect the shutter motor. The status of the binary input is monitored on a cyclical basis.
• Door contact query and visualisation in the Smart Home App: An open door results in the raising and locking of the blind or shutter.

Switching functions

• NO contact or NC contact operation.
• Setting of a switch-on or switch-off delay.
• Staircase function; a pre-warning time can also be set.
• Parameterisation as a switching function for lights or socket outlets, a garage door function or a door opener function, for example.
• Garage door function: The time for closing the relay can be parameterised.
• Door opener function: The time for closing the relay can be parameterised.

Function in the Gira KNX system

• Blind or switching operation can be parametrised. In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into one blind output. Mixed operation at one actuator (e.g. A1 & A2 blind, A3 & A4 blind, A5 switching, A6 switching ...) is possible.
• Actively transmitting feedback or status messages can be delayed globally after a bus voltage recovery or ETS programming operation.
• Manual operation of the outputs independently of KNX with intelligent LED status displays for saving energy.
• Advanced manual actuation: Toggle between blind mode and switching mode before starting up the ETS.
• Heartbeat function for monitoring the device, cyclical transmission 1 bit.
• Bistable relay.
• Supply from KNX bus, no additional power supply required.
• Simplified terminal connection (no terminal overlapping).

Blind functions

• Operating mode can be parametrised: Control of slat blinds, roller shutters, awnings, skylights or ventilation flaps.
• Separately parameterisable curtain runtimes with runtime extension for movements into the upper end position.
• For slat blinds, a slat runtime can be parametrised independently.
• Switchover time for change of direction and times for short and long-term operation (Step, Move) can be set.
• Feedback on the curtain or slat position. In addition, feedback on an invalid curtain position or a drive movement is possible.
• Assignments of up to 5 different safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm), or with cyclical monitoring. The safety functions (objects, cycle times, priority) are created in a device-based manner for all outputs. An assignment of individual outputs to the safety functions and the safety reactions can be parametrised based on the channel.
• Blocking function can be implemented for each blind output.
• Simple sun protection: Sun protection function with fixed and variable curtain or slat positions at the beginning or end of the function can be activated separately for each output.
• Up to 16 internal scenes can be parametrised per output.
• Scene memory function: Additional visual feedback.
• Twilight function.
• Status messages for upper and lower end positions.

Switching functions

• Independent switching of the switching outputs.
• NO contact or NC contact operation.
• Switching feedback: transmitting to the bus cyclically or when there is a change.
• Logical individual linking function for each output.
• Reaction upon bus voltage recovery can be set for each output (ON or no reaction).
• Blocking function with feedback object can be parametrised for each channel.
• Time functions (switch-on and switch-off delay, staircase light function – also with advance warning function).
• Integration into light scenes possible: Up to 16 internal scenes can be parametrised per output.

• KNX Data Secure compatible.
• Fast application download (long frame support).
• Firmware can be updated using the Gira ETS Service App (additional software).
• Can be updated via the Gira Project Assistant (GPA)
• Installation on DIN top-hat rail.

• KNX connection and junction terminal included with delivery.