eNet wireless dimming actuator, 4-gang
4 x 250 W/VA

Select for comparison

Media database

Not currently available to order. Expected to be available again from October 2023.

Necessary accessories

One of the following articles:

server DRA WL receiver mod. DRA

Optional accessories

Tronic transformers

S3000 uni.LED pow.booster DRA

Features

The eNet wireless dimming actuator receives telegrams for switching and dimming various electrical loads from the eNet wireless reception module or eNet server via a data cable.
Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps.
Bulb-saving switch-on.
Switch-on and minimum brightness can be saved for each output.
Scene operation.
Status display of the outputs with LED.
Status feedback to eNet wireless sensors.
Parallel switching of several outputs to a load of 950 W possible.
Short-circuit and excess-temperature protection.
Automatic or manual setting of dimming process.

Can be set with eNet server:

Maximum brightness.
Dimming process.
Dimming speed.
Delay time.
Switch-on/off delay.
Dimming ramp up/down.
Switch-off pre-warning.
Permanent-on, permanent-off.
Hotel function.
Light control.

Technical data

Rated voltage:

AC 230 V, 50/60 Hz

Power loss:

max. 8 W

Standby per output:

max. 0.3 W

Ambient temperature:

-5 °C to +45 °C

Connected load per output

Light bulbs:

20 to 250 W

HV halogen lamps:

20 to 250 W

Wound transformer:

20 to 250 VA

Wound transformer with NV-LED:

20 to 100 VA

Tronic transformer:

20 to 250 W

electronic transformer with NV-LED:

typically 20 to 100 W

LED lamps:

typ. 3 to 50 W

Compact fluorescent lamp:

typ. 3 to 50 W

Parallel switched outputs at max. 95% utilization:

max. 950 W at AC 230 V, 50/60 Hz

Connections:

max. 4 mm²

Length of the data cable:

Max. 3 m

Notes

An eNet wireless reception module or an eNet server is required to operate this DIN-rail mounting device.
Wireless approval is valid for EU and EFTA countries.

Dimensions

Modular widths (MW):

Additional figures available in the media database

You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.

To the media database