System 3000 universal LED dimming insert Standard

Select for comparison

Media database

Necessary accessories

Optional accessories

Power booster

compensation mod. LED S3000 uni.LED pow.booster DRA

Features

Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lights, dimmable inductive transformers for halogen or LED lights, HV LED or compact fluorescent lamps.
Automatic or manual setting of dimming principle according to load (leading or trailing edge).
Display of the selected operating mode using LED.
Switch-on function that preserves the life of the lamp.
Switch-on brightness can be saved permanently.
Switch on with the last brightness set, or a saved switch-on brightness.
Minimum brightness can be set.
Electronic short-circuit protection.
Electronic excess-temperature protection.
Operation with or without a neutral conductor connection.
Pushbutton dimmer.

Combination with RF operating top unit, 1-gang / 2-gang for KNX

Dimming actuator, 1-gang.
Sensor channel, 1-gang or 2-gang.
Local control of System 3000 insert possible.
Wireless control of other devices for KNX possible as a sensor.
Insert function selection:Adjustable dimming behaviour and dimming characteristic, soft on and soft off function, fading function, staircase function with switch-off pre-warning, scene function (16 scenes), blocking function, time delays.

Technical data

Rated voltage:

AC 230 V, 50/60 Hz

Standby:

0.1 to 0.5 W

Connected load at 25 °C

HV LED lamps (leading edge):

typically 3 to 60 W

HV LED lamps (trailing edge):

typically 3 to 120 W

Compact fluorescent lamp:

typically 3 to 60 W

Light bulbs:

20 to 210 W

HV halogen lamps:

20 to 210 W

Tronic transformers:

20 to 210 W

Electronic transformer with LV LED (leading edge):

typically 20 to 60 W

Electronic transformer with LV LED (trailing edge):

typically 20 to 120 W

Wound electronic transformer:

20 to 210 VA

Wound transformer with NV-LED:

typically 20 to 60 VA

Cable length

Load:

Max. 100 m

Installation depth:

24 mm

Installation:

in device box in accordance with DIN 49073

Ambient temperature:

-5 °C to +45 °C

Notes

In principle, it is possible to operate the dimmer without connecting the neutral conductor, but some LED and CFLi light sources make the neutral conductor connection necessary to avoid flickering.
Operation without a neutral conductor increases the minimum load for light bulbs, HV halogen lamps, Tronic transformers and wound transformers to 50 W.
Electronic transformers and ballast devices for LED lamps can be operated with the dimming procedure specified by the manufacturer.
If the ambient temperature is higher than 25 °C, the connected load must be reduced.

Additional figures available in the media database

You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.

To the media database