Switching actuator, 8-gang 16 A for KNX
New
Specification
Item no.
GBP/unit
excl. VAT:
excl. VAT:
Room
Quantity
EAN
PU
PS
DRA
5007 00
324.00
4010337132073
1
66
Recommended retail price, prices valid for United Kingdom as of the stated date 01/26
Price system (PS) not equal to 1, 14 = reduced discount.
New product. Available from 11/2026.
DRA
EAN 4010337132073
Item no. 5007 00PU 1
GBP 324.00PS 66
Recommended retail price, prices valid for United Kingdom as of the stated date 01/26
Price system (PS) not equal to 1, 14 = reduced discount.
New product. Available from 11/2026.
Optional accessories
DRA switching actuators with integrated bus coupler. For switching independently controllable groups of loads. With manual switch for switching over the relay (On/Off) parallel or without KNX operation. Multi-phase connection. No additional power supply required.
Features
- Xpress configuration for simplified ETS project planning based on predefined standard use cases.
- Individual configuration with full range of functions available for selection.
- Simplified configuration profiles for clear application scenarios.
- Diagnostic function for ETS application and firmware compatibility.
- Up to 8 internal logic functions for simple and complex links.
- Electronic manual operation for each channel with LED display.
- Smart linking enabled.
Switch outputs
- Independent switching of all outputs.
- Each output can be operated as an NO contact or an NC contact.
- Central switching functions via up to 6 objects (On/Off/Permanently On/Permanently Off) and group feedback.
- Status message can be transmitted on change or cyclically.
- Response in the event of bus voltage failure/restoration can be configured for each output.
- Each output has an individual logical link.
- Blocking or forced setting function for each output.
- Comprehensive timer functions such as switch-on and switch-off delay, staircase light (with pre-warning).
- Can be integrated into up to 64 scenes per output.
- Elapsed operating time meter can be activated for each output.
- Input monitoring for cyclic updating of the switching object with safety position.
Logic functions
- 8 internal logic functions for processing and linking KNX telegrams.
- Supports logic gates such as AND, OR and XOR with up to four inputs.
- Includes converters, blocking elements and timer functions for flexible signal processing.
- Comparators and limit switches for various data formats, including hysteresis.
- All logic functions have their own KNX communication objects and can evaluate signals from the actuator and other bus devices.
Technical data
| KNX medium | TP256 |
| KNX current consumption | |
| 2-gang to 16-gang device variants | 5 to 18 mA |
| 24-gang device variant | 5 to 24 mA |
| Circuit breaker | max. B16 |
| Switching voltage | AC 250 V ~ |
| Current carrying capacity of adjacent outputs | Total 20 A |
| Connections | |
| KNX | Connection and junction terminal |
| Load | Screw terminals (max. 4 mm² or 2 × 2.5 mm²) |
| Ambient temperature | -5 °C to +45 °C |
| Switching current | |
| AC1 pursuant to DIN EN IEC 60947-4-1 | 16 A |
| Fluorescent lamps | 16 AX (140 µF) |
| Maximum switch-on current | 235 A for 1000 μs (with 400 W HV LED load) |
| Total currents of all outputs | Total 80 A |
| Loads per output | |
| Light bulbs | 1500 W |
| HV LED lamps | 400 W |
| Motors | 1150 VA |
Notes
- KNX Data Secure compatible.
- Firmware can be updated using the Gira KNX Service App (additional software).
- Configuration and start-up of the device from ETS 5 version 5.7.7 or higher or ETS 6 version 6.3 or higher (recommended).
Scope of delivery
- Switching actuator.
- Connection terminal for KNX.
- Secure Card.
- Operating instructions.
Dimensions
| Modular widths (MW) | 6 |
Schaltaktor 16 A REG für KNX
EU Konformitätserklärungen
EU Konformitätserklärungen
