CO₂ sensor with humidity and room temperature controller for KNX
System 55

Features

• Limit value monitoring for CO₂ concentration and humidity.
• Dewpoint alert for cooling ceilings and conservatories, for example, to prevent potential mould growth.
• Two binary inputs for connecting zero-voltage contacts.
• Logic gates for simple linking functions.

Sensor

• Up to four different limits can be set for the CO₂-sensor.
• Adaptation to current sea level above NN.
• Max. two limit values can be set for the humidity sensor.

Controller

• 5 operating modes: Comfort, standby, night, frost or heat protection, and controller lock-out (e. g. dew-point mode).
• Heating/cooling functions: Heating, cooling, heating and cooling, basic and additional heating, basic and additional cooling.
• Preset control parameters for common radiators/cooling units.
• Controller can be deactivated (dewpoint operation) or controller or operation of the controller can be blocked.
• Valve protection function (valve is opened cyclically every 24 hours).
• Control types: continuous PI control, switching PI control (PWM), and switching 2-point control (on/off).

Inputs

• Free assignment of the functions switching, dimming, blind and value transmitter to the inputs.
• Blocker for blocking individual inputs.
• Behaviour can be configured following bus voltage recovery.
• Telegram rate limiting.
• Switching function: two independent switching objects are available for each existing input and can be enabled individually, command for leading and trailing edge can be set independently (ON, OFF, CHANGE, no reaction).
• Dimming function: Single-surface and double-surface operation, time between dimming and switching and dimming increment can be set, telegram repetition, and stop telegram transmission possible.
• Blind function: command can be set with rising edge (no function, UP, DOWN, SW), operating concept can be parameterised, time between short and long-term operation adjustable, slat adjustment time adjustable.
• Encoder and light scene auxiliary unit function: edge (push button as NO contact, push button as NC contact, switch) and value with edge can be configured, value adjustment by pressing and holding a button for value transmitters possible, light scene auxiliary unit with/without memory function.

Technical data

Notes

• The CO₂-sensor does not have any operating or display elements.
• The use of a switch terminal box for connection of the external inputs is recommended.
• A separate bus coupler is not required to operate the CO₂-sensor.

Additional figures available in the media database