The eNet wireless dimming actuator enables switching and dimming of various electrical loads.
Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps.
Bulb-saving switch-on.
Switch-on and minimum brightness can be saved for each output.
Scene operation.
Status display with LED.
Status feedback to eNet wireless sensors.
Short-circuit and excess-temperature protection.
Automatic or manual setting of dimming process.
Can be set with eNet server:
Maximum brightness.
Dimming process.
Dimming speed.
Delay time.
Switch-on/off delay.
Dimming ramp up/down.
Switch-off pre-warning.
Permanent-on, permanent-off.
Hotel function.
Light control.
Repeater function.
Localisation of the device.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Power loss:
max. 1.5 W
Standby:
max. 0.5 W
Ambient temperature:
-25 °C to +70 °C
Connected load
Light bulbs:
20 to 250 W
HV halogen lamps:
20 to 250 W
Wound transformer:
20 to 250 VA
Wound transformer with NV-LED:
20 to 100 VA
Tronic transformer:
20 to 250 W
electronic transformer with NV-LED:
typically 20 to 100 W
LED lamps:
typ. 3 to 70 W
Compact fluorescent lamp:
typ. 3 to 70 W
Connections:
max. 4 mm²
Wireless frequency:
868.0 to 868.6 MHz
Range (free field):
approx. 100 m
Notes
Installation in device box, surface-mounted housing, or in an installation adapter.
Dimensions in mm
Ø 53
H 28
Additional figures available in the media database
You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.
GB
