Switching actuator for switching light, controlling a door opener on back/side doors or other functions using the Gira door communication bus.
Actuation of a zero-voltage switching contact 230 V / 10 A via the 2-wire bus.
The switching actuator can be actuated by:the “Door” and “Light” buttons on the home station,the call button on the door station,the call button on the home station.
The switching actuator can be used in five different operating modes: switching, timer/sec., timer/min., pulse, and door opener.
Impulse function for controlling existing automatic staircase mechanisms.
Binary input for switching functions via a connected mechanical push button.
Switching time can be adjusted progressively from 1 to 10 s or 1 to 10 min., depending on the function set.
Technical data
Power supply:
via the 2-wire bus
Zero-voltage relay contact
either:
10 A at AC 230 V
either:
2 A at DC 30 V
Number of call buttons that can be taught in:
max. 16
Ambient temperature:
-5 °C to +45 °C
Notes
The switching actuator is intended to be installed in the sub-distribution. If this is not possible, use a standard surface-mounted distributor.
This component enables door communication systems with more than 30 devices to be set up.
Dimensions
Modular width (MW):
2
Additional figures available in the media database
You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.
GB
