Presence detector Komfort for KNX

Features

• Flush-mounted device with integrated KNX bus coupler.
• Programming LED/button is visible and can be operated following removal of the ornamental ring once installed.
• PIR sensors: three sensors (crossed beam paths), integrated brightness sensor.
• Adjuster for manual correction of sensitivity.
• Sensitivity is configurable.
• Sensitivity adjuster on the device can be deactivated using the software.
• Indication of motion detection (permanent or only during walking test).
• Separate evaluation in the long range of the three PIR sensors with 120 ranges of detection each with overlapping.
• Manual actuation using IR remote control.
• A maximum of 5+2 function blocks are configurable.
• Functions that can be set for each function block 1 to 5: ceiling observer, presence detector, signal mode.
• Function block 6: presence detector with light control.
• Function block 7: brightness sensor with limit value monitoring.
• Function block switchover, e.g. for day/night mode or week/weekend mode.
• Function blocks 1 to 5: individual device, main unit, auxiliary unit can be set.
• Operating modes which can be set for individual device as a main unit: automatic, semi-automatic (manual ON / automatic OFF, or automatic ON / manual OFF).
• Two outputs per function block (1 to 5) for function ceiling observer, presence detector.
• Functions of ceiling observer, presence detector per output: Switching, staircase light function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
• Ceiling observer, presence detector: Dusk stage can be set via external communication object or per teach-in, additional transmission delay via external communication object, adaptive delay time (self-teaching additional transmission delay), short-term presence function, feedback of dusk stage, block function, manual operation using push button sensor (separate communication object), switch-off brightness (for presence detectors) via teach-in, measurement of time period after last motion.
• Function of presence detector with light control: combination with function block of presence detector or individual device, setpoint value can be set, setpoint value specified via external communication object, setpoint offset via external communication object, teach-in function, feedback of the effective setpoint value.
• Function of brightness sensor with limit value monitoring: up to three limit values are configurable, functions of switching, dimming value transmitter, light scene auxiliary unit, configurable hysteresis, limit value via external communication object or teach-in, block function.

Technical data

Notes

• The presence detector is not suitable for alarm messages in VdS-compliant alarm systems.
• Ceiling mounting on stable ceilings in device box or surface-mounted housing.

Scope of supply

• Clip-on screen for limiting the range of detection is included in the scope of supply.
• Connection and junction terminal for KNX included in the scope of supply.

Dimensions in mm

Additional figures available in the media database

Further links