Switching actuator, 24-gang 16 A / blind actuator, 12-gang 16 A Standard for Gira One and KNX

Select for comparison

Media database

Alternative description

Switching actuator, 24-gang 16 A / blind actuator, 12-gang 16 A Standard for KNX

Optional accessories

set phase busbar 1-p sw./bl.act. 16/8-g set phase busbar 1-p sw./bl.act. 24/12-g 10 x end cap phase busbar

Depending on the parameterisation, the actuator can be used as a switching actuator or a blind actuator. Mixed configurations of switching and blind actuators are also possible. For the blind actuator function, two neighbouring relay outputs are combined to form one blind output.

Features

Actuator for switching devices or for controlling blinds, shutters, awnings, skylight operation.
In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into one blind output.
Mixed operation at one actuator (e.g. A1 and A2 blind, A3 & A4 blind, A5 switching, A6 switching, etc.) is possible.
Manual actuation of the outputs.
Programming and start-up with the Gira Project Assistant (GPA), from version 5.0.
Encrypted data transfer between the Gira One devices.

Shading and ventilation function

Control of slat blinds, shutters, awnings, skylights or roof domes.
Movement times optionally adjustable.
Sun protection function with curtain or slat positions at the beginning or end of the function that can be set for each output.
Setting of the delay time at the beginning or end of the sunshine.
Fabric stretching for awnings.
In the event of an active wind alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the wind alarm, the blinds raise and are automatically locked. The status of the binary input is monitored on a cyclical basis.
In the event of an active rain alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the rain alarm, the skylights or roof domes close immediately and are automatically locked. The status of the binary input is monitored on a cyclical basis.
In the event of an active frost alarm, e.g. with a conventional weather station with zero-voltage relay outputs for the frost alarm, active travel by shutters is stopped and locked to protect the shutter motor. The status of the binary input is monitored on a cyclical basis.
Door contact query and visualisation in the Smart Home App: An open door results in the raising and locking of the blind or shutter.

Switching functions

NO contact or NC contact operation.
Setting of a switch-on or switch-off delay.
Staircase function; a pre-warning time can also be set.
Parameterisation as a switching function for lights or socket outlets, a garage door function or a door opener function, for example.
Garage door function: The time for closing the relay can be parameterised.
Door opener function: The time for closing the relay can be parameterised.

Technical data

Gira One Medium:

Twisted pair YCYM 2 x 2 x 0.8

Test voltage:

4 kV (KNX/EIB bus line)

Rated voltage:

DC 21 to 32 V SELV

Switching capacity:

AC 250 V, 16 A / AC1

Maximum switch-on current:

800 A (200 µs), 165 A (20 ms)

Current carrying capacity of adjacent outputs:

Total 20 A

Connected load

Ohmic load:

3000 W

Capacitive load:

16 A, max. 140 µF

Motors (blind or fan):

1380 W

Light bulbs:

2300 W

HV halogen lamps:

2500 W

HV LED lamps:

typically 400 W

Wound electronic transformer:

1200 VA

Tronic transformer:

1500 W

Fluorescent lamps, uncompensated:

1000 VA

Fluorescent lamps,lead-lag circuit:

2300 VA

Fluorescent lamps, parallel-compensated:

1160 VA

Mercury-vapour lamps, uncompensated:

1000 W

Mercury-vapour lamps, parallel-compensated:

1160 W

Connections

Gira One Bus:

Connection and junction terminal

Load:

Screw terminals (max. 4 mm² or 2 x 2.5 mm²)

Current consumption

5023 00:

4 to 18 mA

5028 00:

4 to 18 mA

5030 00:

4 to 24 mA

Gira One Bus:

4 to 24 mA

Notes

Installation on DIN top-hat rail.
Can be updated via the Gira Project Assistant (GPA)

Scope of supply

KNX connection and junction terminal included in the scope of supply.

Dimensions

Modular width (MW):

Additional figures available in the media database

You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.

To the media database