Combination actuator blind and heating for KNX

Features

• The combination actuator blind and heating is a combination of a blind actuator with a heating actuator. It has three binary inputs for controlling the connected blind, shutter, awning or ventilation flap in the state of delivery.
• Operating mode can be parametrised: blinds, shutters, awnings or ventilation flaps.
• Separately parameterisable movement times with movement time extension for movements into the upper end position.
• Feedback on the curtain or slat position. Active or passive (object can be read out) cyclical feedback functions.
• Assignments of up to five different safety functions (three wind alarms, one rain alarm, one frost alarm) or optionally with cyclical monitoring.
• Solar protection function with fixed and variable curtain or slat positions can be activated.
• Integration in complex shading systems, optionally with automatic heating/cooling and presence function.
• Behaviour after bus voltage failure and recovery can be set.
• Feedback can be delayed until after the recovery of bus voltage.
• Forced setting function can be realised for each blind output.
• Integration in scenes is possible, 8 internal scenes at the most can be parameterised per channel.
• Memory function for light scenes.
• Output, can be controlled via a corrected variable (1-bit or 1-byte).
• Status feedback (1-bit or 1-byte) automatically or on read request.
• Valve control (open/closed while de-energized) can be configured.
• Summer or winter operation can be selected via an object.
• Cyclical monitoring of the corrected variable; if a corrected variable telegram remains off within a monitoring period, the output switches into emergency mode and an alarm message is sent.
• Each output can be locked in a forced position, and different values are possible for summer and winter operation.
• Behaviour upon bus voltage recovery and fails can be parameterised separately for each output.
• Messages to indicate short circuits or load failures can be set via an object.
• Control of valve drives in switching operation or PWM operation.
• Protective function against jammed valve.

Technical data

Additional figures available in the media database