Gira G1 230 V

Select for comparison

Media database

Alternative description

Gira G1 230 V for KNX

Optional accessories

Temperature sensor module for Gira G1

temp.sens.mod. Gira G1

The Gira G1 is a multi-functional room operating device for visualising and operating a variety of building functions. For use in the Gira One system and Gira door communication system. The respective range of functions depends on the firmware used.
For details on the exact scope of functions, please refer to the Gira online catalogue and the device’s technical documentation.

Features

A gesture-controlled multi-touch display is used for operation.
Connection and communication are via LAN or WLAN, depending on the variant.
Integrated speaker.
Integrated microphone with echo compensation.

Potential applications and combinations

As a multi-functional room operating device, the Gira G1 provides the following functions and combiation of functions:
Gira One Client.
Home station video.

Gira One server client

Depending on the configuration, the Gira G1 can also be used as a client in systems with a Gira One server.
Once activated, the Gira G1 displays the Gira interface of the Gira Smart Home App. Up to 250 Gira One devices can be displayed in this manner.
A maximum of 50 Gira G1s can be used within a single Gira One project.
Gira G1 with flush-mounted connection module 230 V WLAN.
Data communication via WLAN.

Technical data

Power consumption

Maximum:

7 W

Typical:

4 W

Minimum:

2 W

Power supply

PoE performance class 0:

DC 48 V PoE

LAN standard:

IEEE 802.3af

Connection cable

Ethernet specification:

Cat.5_e, cat.6, cat.6_a, cat.7

Display

Type:

TFT

Size:

15.3 cm (6″)

Number of colours:

16.7 M

Resolution:

480 x 800 px (WVGA), 155 ppi

Brightness:

350 cd/m²

Contrast ratio:

1:500

Viewing angle:

> 80° all round

Proximity sensor

Range:

Max. 50 cm

Detection range:

30° horizontal, 30° vertical

Protection class:

IP21

Installation depth:

32 mm

Ambient temperature:

0 °C to +45 °C

Power supply:

AC 230 V, 50/60 Hz

WLAN standard:

IEEE 802.11b/g/n - 2.4 GHz

Installation depth:

32 mm

Notes

Suitable for indoor use only.
Recommended mounting height: 150 cm above floor.
Installation is performed on a deep device box (an electronics box is recommended for a LAN connection).
Can be used as a home station in combination with the DCS IP Gateway.
When planning the system, please observe the technical information on network planning in the device documentation.
The Gira Project Assistant (GPA) is required for firmware updates. The GPA is available free of charge in the Gira download area.
The use of an electronics box is recommended to install the flush-mounted connection module PoE.
A commercially available PoE-enabled switch or router or a PoE injector is required.

Scope of supply

Display module, mounting frame, flush-mounted connection module 230 V WLAN

Dimensions in mm

Gira G1 (incl. flush-mounted power supply unit):	97	168	47
Gira G1 (without flush-mounted power supply unit):	97	168	15
Mounting height:	-	1500	-

Additional figures available in the media database

You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.

To the media database

Further links

Gira G1
More

Download

Data sheet

PDF

Load

Advertisement text

TXT

Load

Revit file for BIM (Building information modeling)

Order no. 206705

RFA, 364 Kb

Load

IFC file for BIM (Building information modeling)

Order no. 206705

IFC, 19 Kb

Load

Factory reset on Gira G1 via SD card
Software

The file from the ZIP folder can be used to trigger a factory reset on the Gira G1 (up to firmware version 1.4.65).
Please follow the instructions in the PDF file.

Order no. 2069 ..
2067 ..
2077 ..

ZIP, 46 Kb

Load

Gira Door communication system
Guides / system basics

Basics, planning examples
Door communication system
Order no. 1736 90

Order no.

PDF, 5.563 Kb

Load

Gira G1
Certificates

License agreement

Order no. 2069 ..
2067 ..
2077 ..

ZIP, 92 Kb

Load

Gira G1
Installation instructions

Installation instructions

Order no. 2069 ..
2067 ..
2077 ..

PDF, 1.686 Kb

Load

Gira G1
Product database

from ETS 5.5.4 (from Firmware 2.0.442)

Order no. 2069 ..
2067 ..
2077 ..

ZIP, 23.262 Kb

Load

Gira G1
Technical Documentation

Technical documentation (firmware version 3.2.148 or higher)

Order no. 2069 ..
2067 ..
2077 ..

PDF, 7.682 Kb

Load

Gira G1
Operating instructions

Operating instructions (firmware version 3.3.88 or higher)

Order no. 2069 ..
2067 ..
2077 ..

PDF, 5.045 Kb

Load

Gira G1 firmware update
Software

Universal firmware that contains all supported operating modes.
To perform the update the Gira Project Assistant V 4.7 is required. Please follow the instructions in the enclosed documentation.

Order no. 2069 ..
2067 ..
2077 ..

ZIP, 321.154 Kb

Load