New

Switching actuator, 16-gang 16 A / blind actuator, 8-gang 16 A Standard for Gira One and KNX

Select for comparison

Media database

New product.

Alternative description

Switching actuator, 16-gang 16 A / blind actuator, 8-gang 16 A Standard for Gira One

Optional accessories

set phase busbar 1-p sw./bl.act. 16/8-g 10 x end cap phase busbar

Depending on the parameterisation, the actuator can be used as a switching actuator or a blind actuator. Mixed configurations of switching and blind actuators are also possible. For the blind actuator function, two neighbouring relay outputs are combined to form one blind output.

Features

Blind or switching operation can be parametrised. In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined into one blind output. Mixed operation at one actuator (e.g. A1 & A2 blind, A3 & A4 blind, A5 switching, A6 switching ...) is possible.
Actively transmitting feedback or status messages can be delayed globally after a bus voltage recovery or ETS programming operation.
Manual operation of the outputs independently of KNX with intelligent LED status displays for saving energy.
Advanced manual actuation: Toggle between blind mode and switching mode before starting up the ETS.
Heartbeat function for monitoring the device, cyclical transmission 1 bit.
Bistable relay.
Supply from KNX bus, no additional power supply required.
Simplified terminal connection (no terminal overlapping).

Blind functions

Operating mode can be parametrised: Control of slat blinds, roller shutters, awnings, skylights or ventilation flaps.
Separately parameterisable movement times with movement time extension for movements into the upper end position.
For slat blinds, a slat movement time can be parametrised independently.
Switchover time for change of direction and times for short and long-term operation (Step, Move) can be set.
Feedback on the curtain or slat position. In addition, feedback on an invalid curtain position or a drive movement is possible.
Assignments of up to 5 different safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm), or with cyclical monitoring. The safety functions (objects, cycle times, priority) are created in a device-based manner for all outputs. An assignment of individual outputs to the safety functions and the safety reactions can be parametrised based on the channel.
Blocking function can be implemented for each blind output.
Simple sun protection: Sun protection function with fixed and variable curtain or slat positions at the beginning or end of the function can be activated separately for each output.
Up to 16 internal scenes can be parametrised per output.
Scene memory function: Additional visual feedback.
Twilight function.
Status messages for upper and lower end positions.

Switching functions

Independent switching of the switching outputs.
NO contact or NC contact operation.
Switching feedback: transmitting to the bus cyclically or when there is a change.
Logical individual linking function for each output.
Reaction upon bus voltage recovery can be set for each output (ON or no reaction).
Blocking function with feedback object can be parametrised for each channel.
Time functions (switch-on and switch-off delay, staircase light function – also with advance warning function).
Integration into light scenes possible: Up to 16 internal scenes can be parametrised per output.

Technical data

KNX medium:

TP256

Rated voltage

KNX:

DC 21 to 32 V SELV

Switching capacity:

AC 250 V, 16 A / AC1

Maximum switch-on current:

800 A (200 µs), 165 A (20 ms)

Current carrying capacity of adjacent outputs:

Total 20 A

Connected load

Ohmic load:

3000 W

Capacitive load:

16 A, max. 140 µF

Motors (blind or fan):

1380 W

Light bulbs:

2300 W

HV halogen lamps:

2500 W

HV LED lamps:

typically 400 W

Wound electronic transformer:

1200 VA

Tronic transformer:

1500 W

Fluorescent lamps, uncompensated:

1000 VA

Fluorescent lamps,lead-lag circuit:

2300 VA

Fluorescent lamps, parallel-compensated:

1160 VA

Mercury-vapour lamps, uncompensated:

1000 W

Mercury-vapour lamps, parallel-compensated:

1160 W

Connections

KNX:

Connection and junction terminal

Load:

Screw terminals (max. 4 mm² or 2 x 2.5 mm²)

Current consumption

KNX:

5 to 18 mA

Notes

KNX Data Secure compatible.
Fast application download (long frame support).
Firmware can be updated using the Gira ETS Service App (additional software).
Installation on DIN top-hat rail.

Scope of supply

Connection and junction terminal for KNX included in the scope of supply.

Dimensions

Modular width (MW):

Additional figures available in the media database

You will find figures of the selected products in the media database. You may use this figures for your publications. Please read the corresponding terms of use.

To the media database